POK English catalogue (USA)

POK France - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: export@pok.fr - Web: www.pok.fr 114 Monitors - Remote control systems POK EasyDrive © All our monitors compatible with POK EasyDrive© can be controlled via a wired system "TECHNO" or wirelessly with a radio remote control, corresponding to our systems "MINI" and "FULL". For potentially explosive environments choose our remote control MINI ATEX that provides all the safety required and that can be used with confidence. Our control systems were all developed by combining the most stringent regulatory constraints and our industrial knowledge, so we can guarantee a high level of safety and reliability. Our ATEX system was validated by LCIE, a leading certification body in Europe. Remote control FULL or MINI These remote controls offer the advantage of controlling a monitor while keeping the fireman operating it further away from the danger and increasing the overall efficiency (better mobility). The monitor should remain within good sight of the fireman. However one can operate the monitor from up to 1640 feet away when using the system FULL. To work, the monitor needs to be supplied with power, if not equipped with its own battery. A very efficient system for automatic frequency search based on the "Listen Before Talking" principle (LBT) ensures optimum operation of the same radio link in a polluted electromagnetic environment. The transmitter is continuously in bidirectional communication with the receiver. A general emergency stop of the "push / turn" type, redundant and monitored in real time, ensures availability of the latter at any time and allows an immediate halt to any movement in case a potential hazard occurs. Using powerful radio systems available on the market, the remote control operates with a license-free frequency band offered in most countries in the world. If necessary, we can provide specific frequencies (end user requirement). Remote control TECHNO The TECHNO remote control allows the control of the monitor through a wired transmitter connected to a control cabinet. Through the use of an industrial communication network (CANopen) and embedded controllers of the latest technology, the TECHNO system allows to chain multiple monitors and thus to create a network. If the distance between the monitor and the transmitter must exceed several hundred meters, we suggest the use of optical fibers. All monitors of a network can be controlled from a single point and from a single transmitter. A graphic display of 4.3 inches on the transmitter shows the actual position of the monitor in real time, that is the direction in which the monitor is pointing. The flexibility of this system allows to add additional features such as: • Detecting a hot spot • Learning multiple points of attack of the fire • Other functions on request A backup battery system supplies power to the monitor in case of failure of the main power supply (optional). The TECHNO remote control system is protected against lightning in accordance with the circular of April 24th 2008. The entire installation is fully customizable by the transmitter thanks to intuitive functions.